Your own SVG artwork → one print-ready multi-colour 3MF for Bambu Studio. Shapes and colours are read straight from the vector file: the back lies flush on the plate, the front is a 0.5 mm relief, no supports needed.
The body is a solid one-colour oval; its proportions come from the SVG. In auto mode the smallest oval that houses the ⌀25.4 mm NFC tag and the hanging hole is used.
The rim is generated from the oval itself, so it is always there: flush with the back artwork and 0.2 mm proud on the front, keyed 0.2 mm into the body. The logo stays strictly inside it.
The logo itself prints white; a band of this colour hugs the outside of every letter and counter, one layer below the letter tops — so the last printed layer is always white. 0.4 mm = one nozzle line (thinnest, may look dotted), 0.8 mm = two lines (safe default).
100% = automatic fit inside the rim. Above 100% the artwork grows over the inner gap toward the body edge.
Every unique fill becomes one part; the largest area becomes the body
Flush first-layer inlays on the build-plate side
Convert strokes and text to outlines (Path → Object to Path) and give every element a solid fill. Colours are read from the fills, but you can reassign filaments in the slicer.
A sealed round ⌀25.4 × 1.2 mm cavity fits a 1 mm NFC tag with clearance. Minimum body thickness is 3.3 mm with the rim on; pause before the cavity roof to insert the tag.